Summary
Keywords
Full Transcript
Data handling instructions are used to perform movement and manipulations of the memory in the programmable logic controller. The Productivity 2000 Series PLC has fifteen different data handling instructions that can be used in various applications. In this first part, we will be looking at the following instructions: Absolute Encoder (ABSE) – Encoder input using Gray Code or Binary Code Compare Values (CMPV) – Compare two different tags and determine if they are equal, greater than, or less than. Copy Data (CPD) – Copy tags from one location and place them in another. FIFO / LIFO (FILI) – First in, first out / Last in, first out First Bit On/Off (FIB) – Determines first Bit on in a series of bit tags. Inc / Dec (INC) – Increment or decrement a tag by a number. Logical Bits (LOG) – Perform logical operations on Boolean input tags. Logical Words (LOGW) – Perform logical operations on tags. In part 2 of data handling, we will continue with additional data handling instructions. Let's get started with the Productivity 2000 Series PLC data handling instructions. Detailed information can be found on our website. The post for this video is located here: https://accautomation.ca/productivity-2000-plc-data-handling-part-1/ 00:00 Productivity 2000 PLC Data Handling Part 1 01:58 Absolute Encoder (ABSE) Instruction 03:55 Compare Values (CMPV) Instruction 04:39 Copy Data (CPD) Instruction 05:36 FIFO / LIFO (FILI) Instruction 08:26 First Bit On/Off (FIB) Instruction 09:21 Inc / Dec (INC) Instruction 10:19 Logical Bits (LOG) Instruction 11:26 Logical Words (LOGW) Instruction The Productivity 2000 Series PLC is located here: https://accautomation.ca/series/productivity-2000-series-plc-p2000/ Previously in this Productivity 2000 series PLC, we have discussed some of the following: P2000 Hardware Features https://accautomation.ca/productivity-2000-series-plc-p2000-hardware/ https://youtu.be/83MfQK7fzdk Productivity Suite Programming Software Install https://accautomation.ca/productivity-2000-series-plc-software-install/ https://youtu.be/4MTOIrWA1L8 Productivity 2000 Series PLC Communication https://accautomation.ca/productivity-2000-series-plc-communication/ https://youtu.be/UoHoMwk-zi0 First Program https://accautomation.ca/productivity-2000-series-plc-first-program/ https://youtu.be/RLwPofIkIxA PLC Debug Mode https://accautomation.ca/productivity-2000-series-plc-debug-mode/ https://youtu.be/cHtrMaQIS-c PLC Online Programming https://accautomation.ca/productivity-2000-series-plc-online-programming/ https://youtu.be/vHQDFvU6Z0M PLC Tag Database https://accautomation.ca/productivity-2000-series-plc-tag-database/ https://youtu.be/rontLQnSSsE Timers https://accautomation.ca/productivity-2000-plc-ladder-logic-timers/ https://youtu.be/xu1e9_H1WGY Counter https://accautomation.ca/productivity-2000-plc-ladder-logic-counter/ https://youtu.be/S1I1hjwCcd4 Ladder Logic Math https://accautomation.ca/productivity-2000-plc-ladder-logic-math/ https://youtu.be/HZdITEWGSm8 There are several reasons why we are using the Productivity 2000 Series Controller. Here are just a few. - CPU with 5 communication ports - 50MB user memory - Can handle very complex applications easily. - Limitless PID – Autotuning – Individual or Cascade Mode - etc - OLED message display on the CPU module - Plenty of discrete and analog I/O modules - Status displays on all discrete I/O modules - I/O Modules have QR codes. This can be scanned to have the module's latest specifications/wiring diagrams. - OLED data display on analog modules - P2-RS remote I/O expansion module, or use the Productivity1000 P1-RX remote expansion module to add even lower-cost remote I/O to your system - FREE full-featured Productivity Suite software - Programming with several ports - USB, Ethernet, Serial - Hardware auto-discovery - Hot-swappable I/O - Remove cards with power on the system - Choose from three wiring options - Slim DIN rail density form factor: - hardware - power supply, CPU, and seven modules in only 10-1/2 inches - All project files (program, tag name database, and all the program documentation) in the CPU - Run-time editing and debug mode on CPU - Easy data logging with micro SD on CPU - Secure Web server to access data files and system tags - Easy drive and motion controller integration - Coordinate motion control with PS-AMC allows control of up to 16 axes and synchronization of up to 4 axes - Two-Year Warranty The Productivity 2000 series of programmable logic controllers currently has these features built into the P2-550 CPU. This CPU (Central Processing Unit) is known as PAC (Programmable Automation Controller) because of its communication capabilities. ACC Automation https://www.accautomation.ca
Continue this lesson in the app
Install CourseHive on Android or iOS to keep learning while you move.
